We are searching data for your request:
Upon completion, a link will appear to access the found materials.
lawnmower image by sumos from Fotolia.com
One of the symptoms of a bad lawn mower ignition coil appears when you are mowing the lawn and the mower gets hot and literally shuts off. The only real way to determine if it is a bad ignition coil and not another problem is to test the coil itself.
Pull the spark plug boot off of the spark plug, and replace it with the boot of the in-line spark tester.
Plug the free end of the tester into the original spark plug boot. Push it in firmly to make sure there is a solid connection.
Start the mower when it is cold, and look through the window of the tester. Observe that there is a normal spark that allows the mower to run.
- One of the symptoms of a bad lawn mower ignition coil appears when you are mowing the lawn and the mower gets hot and literally shuts off.
- Pull the spark plug boot off of the spark plug, and replace it with the boot of the in-line spark tester.
Replace the tester with the original spark plug boot and start up the engine. If possible, mow some grass to bring the mower up to operating temperature so that it shuts off again.
Replace the original wire with the in-line spark tester, and attempt to start the motor. Watch for the same intensity of a spark that you saw when the mower was cold, If there is little or no spark, the ignition coil is bad and needs replacement. If the spark is good but the mower refuses to start, it's another problem unrelated to the ignition coil.
The best place to check for spark intensity is in a shaded or darkened area. It will be very difficult to see a spark with the tester in full sunlight. Inside an unlighted garage or at dusk is the best way to observe a spark through the tester's window.
Pulling off the spark plug boot and connecting the spark tester when the motor is hot is best accomplished with a pair of gloves.